PRODUCTNews 2026
We are starting 2026 with new products, new services and a new catalog. Our product development team has also been working on new products and solutions for patio construction in 2025, which we would like to introduce to you in this article.
However, we are not only constantly developing our products, we also want to make your work easier with new services in consulting and on the construction site. Thanks to our new online planner, you can now plan your decking from scratch even more easily and receive support from our planning team, especially for demanding decking plans and special solutions.
In addition, with our new“KR-Kompakt” page, we have created a compact and clear consulting tool that employees in specialist retail can use for advice on our new products and for the general presentation of our company.
Of course, you can also find all information on the individual products in the product area of this website.
The cross connector system
For cross bracing with low installation height
Terrace bearing MICRO
For all superstructures with low body height
In 2025, we introduced our MICRO CLIP decking support as a way for you to use our CLIP rails and especially our new FLAT Isostep in combination with a 6 mm high connector, from an installation height of just 36 mm.
With our new MICRO Standard and MICRO with joint cross decking supports, we are expanding our range and offering you the option of installing laterally screwed substructures made of aluminum or wood, as well as ceramic tiles from a height of 15 mm.
Naturally, the new MICRO terrace bearings benefit from the advantages of our system, such as slope compensation of up to 8 %.
The Isopads for our MICRO terrace bearings
Small pads for small bearings
With our coated Isopads in the new 125×125 mm size, we are expanding our pad range and rounding off our system for low installation heights.
The Isopads are available in heights of 3 mm and 8 mm and, thanks to the coated underside, prevent plasticizer migration to the substrate. Like our other Isopads, the 125×125 mm pads also offer durable and resistant protection against pressure and impact loads, level out minor unevenness and help protect against waterlogging.
The terrace start
Existing product in a new guise
The Terrastart has been an important existing product for the start and end fastening of decking boards with lateral grooves for many years. With a new design and new functions, we have developed a Terrastart that fits even better into our existing system and thus creates new possibilities in decking construction.
Unlike its predecessor, the new Terrastart can now also be used for decking transitions on the surface. Thanks to the flat design of the support surface, tradespeople and installers are no longer restricted to using it in the start and end areas. By separating the screw eye, the Terrastart can also be installed particularly close to the wall and the new unlocking function no longer requires an additional key.
In addition, the Terrastart offers the same advantages as its predecessor. Thanks to a 6 mm high contact surface, the plank is sufficiently ventilated and thus fulfills the requirements of constructive wood protection.
The drainage and ventilation profile Pro black anodized
For a sophisticated finish
With our Pro drainage and ventilation profile in 100 and 150 mm, we developed a visual alternative to our normal drainage and ventilation profile two years ago. Particularly in the area of terrace finishes, it is not only the functionality of a product that is important, but also its appearance. Drainage profiles in door reveals are the connecting pieces between the house and the patio and should therefore form a suitable transition.
The drainage and ventilation profile Pro in black anodized extends the range of our profiles by another alternative with the same advantages.
The shape of the profile protects the house wall, as spray and rainwater can run off through the profile. In addition, the profile contributes to sufficient ventilation of the decking surface, preventing waterlogging.
The K-Clip
the ideal fastener for our new Kebony planks
As part of our new plank range, we are offering Kebony Clear 142, another plank made from modified real wood and with a groove on the side. With our new K-Clip and the matching A4 screw, we also supply you with the right fastener for this plank.
The K-Clip has a 6 mm high contact surface, which protects the plank from waterlogging and ensures sufficient ventilation so that structural wood protection can be guaranteed. The integrated spacer bar also ensures a uniform joint pattern of 8 mm during installation.
The K-Clip with A4 screw is intended exclusively for use with our Kebony Clear 142 plank. When using WPC boards, use the K-Clip with C1 screw or another fastener from our range.
The steel connector
Easy installation on steel structures
Steel structures such as steel beams must often not simply be drilled through, as this can jeopardize the integrity of the structure. We have developed our steel connector so that a substructure can still be attached to these steel beams.
The steel connector consists of a CLIP bracket for attachment to our substructure, which can simply be clicked in under the rail, aligned and fixed, a Lindapter for mounting on the steel beam and the appropriate screws.
The principle of the new steel connector is very simple. The CLIP bracket, the connecting piece between the steel beam and the substructure, is mounted on the CLIP rail and the Lindapter is screwed in via the predefined holes in the bracket. By clamping the Lindapter to the steel beam, a stable connection with the steel connector can be guaranteed.
The Z-profile
For simple plank installation in constructions
With our VARIO system, constructions can be planned and implemented quickly and easily. With our new Z-profile, we have now also developed a fastening solution that is ideal for planks on steps, benches, landings and side cladding.
By screwing the Z-profile to both the structure and the plank, the planks can be concealed and installed both horizontally and vertically.
Installation takes place in four steps, whereby the planks can also be reversibly connected as a unit in advance:
- First, the Z-profile is screwed to the plank. To ensure that the plank has the correct overhang to the structure after installation, it should be measured precisely.
- A second Z-profile is then screwed to the structure. The predefined screw channels of our VARIO profile make it easy to install the Z-profile
- Now place the plank with the assembled Z-profile on the construction and align it.
- By sliding the plank into the Z-profile of the construction, the covering snaps into place on the construction and can be easily removed again if required.
TERRACON WPC 138
Natural aesthetics with the latest co-extrusion process
High slip resistance, easy-care material, chlorine and salt water resistant, durable and no graying. With our new WPC plank 138 planks, we are expanding our WPC range to include another plank with four color options.
WPC 138 is a co-extruded, side-grooved plank with a slip resistance class of R13 and is therefore particularly suitable for use in damp and wet environments. It can be used for private and commercial areas and is visually appealing thanks to its soft bi-color gradients. With a manufacturer’s guarantee of 25 years (against structural damage from insects and fungi) and in combination with our substructure system, the result is a long-lasting and permanently beautiful terrace.
Kebony Clear 142
An aesthetic that evolves
With Kebony Clear 142, we are also adopting the characteristic Kebony plank for invisible fastening with a groove on the side in 2026. Our Kebony Clear QLICK plank was one of the most popular planks in 2025, particularly in the QLICK range.
Kebony Clear 142 is characterized in particular by its greying effect. The kebonized wood, which is structurally modified with the help of bio-alcohol, is suitable for both residential and commercial use thanks to its durability and hard-wearing properties. The beautiful gray patina develops with weathering and makes the plank an easy-care alternative in the natural wood sector.
In combination with our K-Clip with A4 screw and our substructures, you can plan and construct decking that you will enjoy for a long time.
QLICK WPC 119
The co-extruded WPC plank for our QLICK system
The new QLICK WPC 119 plank in two modern colors is characterized by its closed, easy-care and non-slip surface.
The complete sheathing of the plank core, which is created by the grooving in the manufacturing process, reduces the swelling behavior of the plank and supports water drainage. This makes the QLICK WPC 119 a chlorine and salt water resistant, low-maintenance plank that can be used in both private and commercial areas.
Available in brown and anthracite, this plank can be used to create modern and compliant decking that will still look as good as new years later.
QLICK Bamboo 119
The stylish floorboard for year-round outdoor use
Exceptionally hard and dimensionally stable – with our new QLICK Bamboo 119 plank, we are expanding our QLICK range with another real wood plank with a special character.
The bamboo plank is particularly characterized by its hardness, its resistance to fungi and microorganisms and the highest durability class according to the EU standard. This makes the plank suitable for both private and commercial use and can be used outdoors all year round.
As with other natural wood floorboards, the plank greys over time and thus develops a special look.
In combination with our QLICK system, the plank can be laid quickly, easily and without any annoying screws on the top side.
QLICK Accoya Grey 118
the pre-colored plank for special visual requirements
With QLICK Accoya Grey 118, we are offering a plank for our QLICK system in 2026 that is particularly striking in terms of its appearance. The through-dyed Accoya plank, with a groove on the underside, is dyed completely grey in the production process, which means that the natural greying process does not cause any visual inconsistencies in the surface. The plank is also characterized by its special dimensional stability and its barefoot-friendly surface.
The sustainably produced plank made from certified Radiata pine is suitable for private and commercial use and gives your terrace a natural look. It can also be laid quickly, easily and in accordance with the rules thanks to its use with our QLICK system.
