Flex / Flex CLIP terrace bearing
For use in floor impact sleeves
Terrace bearings-Flex are equipped with a special mount for floor sleeves 91×91 mm. Thanks to the flexible head and the movable turntable, both the height and the horizontal deviations can be compensated .
Adjustable height: 42 – 87 mm
Adjustability to the side: 20 mm to the left and right of the center
Maximum inclination: 5% to each side (corresponds to approx. 8 cm per 1 meter)
We recommend: After driving in the ground driving-in sleeve, the distance between the head and the ground should be 4 cm. If the soil is too soft, the hole for the ground impact sleeve should be pre-drilled with a soil auger and filled with concrete before insertion. This ensures greater stability.
Advantages:
- Perfect fit for standard 91×91 mm ground socket
- No time-consuming preparation of the substrate necessary
- horizontally adjustable
Product video:
Technical data:
Product | Item no. | Quantity / PU | PU / carton |
|---|---|---|---|
Terrace bearing flex | 6957 | 1 pc. | 24 |
Flex-CLIP terrace bearing | 6967 | 1 pc. | 24 |
Resilience:
(The specified values correspond to the maximum load capacity. With higher loads, the left-hand/right-hand thread may slip into the threads below).
Item no. | Newton / Bearing | kg / bearing |
|---|---|---|
6957 / 6967 | 5935 | 605 |